Gibson GNGJ60JGUC Bedienungsanleitung PDF herunterladen (Seite 17)

When the cleaning is completed, install the

glass panels and the oven door. To install the

oven door, do the above steps in the opposite

sequence.

Replacing the lamp

WARNING!

Risk of electric shock.

The lamp can be hot.

1. Turn off the oven.

Wait until the oven is cooled down.

2. Disconnect the oven from the mains.

3. Put a cloth on the bottom of the cavity.

The back lamp

1. Turn the lamp glass cover to remove it.

2. Clean the glass cover.

3. Replace the lamp with a suitable 300 °C

heat-resistant lamp.

4. Install the glass cover.

Troubleshooting

WARNING!

Refer to Safety chapters.

What to do if...

Problem Possible cause Remedy

There is no spark when you try

to activate the spark generator.

The hob is not connected to an

electrical supply or it is connec‐

ted incorrectly.

Check if the hob is correctly

connected to the electrical sup‐

ply. Refer to the connection dia‐

gram.

There is no spark when you try

to activate the spark generator.

The fuse is blown. Make sure that the fuse is the

cause of the malfunction. If the

fuse is blown again and again,

contact a qualified electrician.

There is no spark when you try

to activate the spark generator.

Burner cap and crown are

placed incorrectly.

Place the burner cap and crown

correctly.

The flame extinguishes immedi‐

ately after ignition.

Thermocouple is not heated up

sufficiently.

After lightning the flame, keep

the spark generator activated

for equal or less than 10 sec‐

onds

The flame ring is uneven. Burner crown is blocked with

food residues.

Make sure that the injector is

not blocked and the burner

crown is clean.

The burners do not work. There is no gas supply. Check the gas connection.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Gibson GNGJ60JGUC Bedienungsanleitung Seite 17

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Gibson GNGJ60JGUC